
Harmful bacteria in drinking water has become a rising concern. Hiding in the nooks and crannies of building plumbing systems, water-borne bacteria (such as Legionella) multiply, becoming a public health hazard. In Europe, Legionnaires' cases have been increasing quickly. By 2018, after a two-year period, the number of cases reported had increased by 60%.
The OASIS® QUASAR UVC-LED Water Treatment system uses UV-LEDs to protect people from Legionella and other harmful pathogens. Treating water at the point of dispense, QUASAR uses Light Emitting Diodes (LEDs) to generate high levels of UV photons. The rays are directed at viruses, bacteria, and other pathogens within drinking water to render those pathogens harmless in seconds.
UV represents wavelengths that fall between visible light and x-ray on the electromagnetic spectrum. UV photons penetrate harmful microscopic organisms and damage the DNA, rendering them incapable of reproduction (microbiologically dead).
UV-LED technology for outpaces traditional UV technology. Conventional UV lamps typically use between 5-200 mg of mercury per lamp, often requiring routine replacement due to the fragile quartz tube. UV-LED lamps on the other hand are a much safer alternative as it is mercury-free.




Your Safety Is Our Priority
Travelmath found the button on a drinking fountain has 48819 colony-forming units per square meter — far worse than the lock on your bathroom stall! Antimicrobial copper technology (MD-Cu29) is an EPA registered antimicrobial copper that fights off microorganisms including MRSA and E coli. OASIS uses MD-Cu29 on key touch point areas to help prevent the spread of disease. The copper continuously works to control the growth of bacteria on the copper surfaces.
The anti-microbial copper is featured on the barrier-free line of products, OASIS' most popular line of water coolers.
OASIS offers antimicrobial protection in 2 ways:
Together, they form a germ-busting dynamic duo to help protect the health and wellness of users of our products.
Long-lasting Modular System
OASIS offers reservoir-based bottled water coolers and POU coolers using both the iconic REMOVABLE RESERVOIR (RR) cooling system with a modular design as well as traditional fixed stainless steel reservoirs. The self-supporting cooler chassis can be quickly and easily removed from the cabinet to simplify the maintenance and servicing process. The REMOVABLE RESERVOIR system simplifies the sanitization process. Just replace the water contact parts with pre-sanitised components. It requires no replacement of disposable parts or use of messy chemicals at your customer site.
An "inside-out" cooling probe design is also used throughout the entire range of RR coolers, ensuring a more efficient cooling method, conserving energy and eliminating condensation within the cooler.
Dual-Float
All OASIS reservoir coolers use a dual-float system to control the water flow into the reservoir. The primary float will close, shutting off the water supply to the reservoir, as the water level inside the reservoir rises. When water is dispensed from the cooler, the primary float will open, allowing the reservoir to refill.
If the primary float should fail to shut off the water supply for any reason, then as the water level continues to rise, the back-up float will actuate and shut off the water supply. The additional security of the back-up float minimises the risk of water leaks.

A Green Alternative To Refrigeration
Travelmath found the button on a drinking fountain has 48819 colony-forming units per square meter – far worse than the lock on your bathroom stall!
Antimicrobial copper technology (MD-Cu29) is an EPA registered antimicrobial copper that fights off microorganisms including MRSA and E coli. OASIS uses MD-Cu29 on key touch point areas to help prevent the spread of disease.
The copper continuously works to control the growth of bacteria on the copper surfaces. The anti-microbial copper is featured on the barrier-free line of products, OASIS' most popular line of water coolers.
